BSC radio is on air now…

Belakangan ini jaringan BSC (belakang SC) kliatan lebih rame…soalnya skrng gi ngapain aja sambil dota, nonton, sampe ngerjain TA, dll. selalu ditemenin sama dj_okbul yang lagi seneng2nya siaran…dari mulai request lagu, kirim-kirim salam, sampe membahas gosip-gosip sekitar Belakang SC dan ITTelkom. Ngakak…..

Kalo ada yg pengen ngikutin jejaknya dj_okbul bisa bikin server radio streaming sendiri tuh…sapa tau berbakat bisa direkomendasiin ke ninetynineers.

Ini Tutorial untuk Radio Streaming di Windows dari anak2 BSC.
Yang jelas hal pertama yang kita perlukan adalah paket software nya, yaitu shoutcastdns dan sambroadcaster . Trus yang perlu pertama kali diinstall adalah shoutcast dns, yah.. seperti biasa kalo di windows tinggal klik-klik doang Dan kemudian, yang harus kita edit adalah file sc_serv yang terletak di dalam folder shoutcastdns (defaultnya C:/Program Files/ShoucastDNS/sc_serv )

Hal-hal yang perlu diedit adalah : (ditandai dengan bold)
; SHOUTcast Distributed Network Audio Server configuration file
; Copyright (C) 1998-2004 Nullsoft, Inc.
; All Rights Reserved.
; Last modified Mar 17 2004
; If you want to manage multiple configurations, just copy
; this file to another name, and run sc_serv with that name
; such as:
; sc_serv.exe sc_leet.conf

; ***************************
; Required stuff
; ***************************
; MaxUser. The maximum number of simultaneous listeners allowed.
; Compute a reasonable value for your available upstream bandwidth (i.e. if
; you have 256kbps upload DSL, and want to broadcast at 24kbps, you would
; choose 256kbps/24kbps=10 maximum listeners.) Setting this value higher
; only wastes RAM and screws up your broadcast when more people connect
; than you can support.
MaxUser=32

; Password. While SHOUTcast never asks a listener for a password, a
; password is required to broadcast through the server, and to perform
; administration via the web interface to this server. This server should
; consist of only letters and numbers, and is the same server your broadcaster
; will need to enter in the SHOUTcast Source Plug-in for Winamp. THIS VALUE
; CANNOT BE BLANK.
Password=default ß ganti

; PortBase. This is the IP port number your server will run on. The
; value, and the value + 1 must be available. If you get a fatal error when
; the DNAS is setting up a socket on startup, make sure nothing else on the
; machine is running on the same port (telnet localhost portnumber — if you
; get connection refused then you’re clear to use that port). Ports < 1024
; may require root privledges on *nix machines. The default port is 8000.
PortBase=8000

; ***************************
; Optional Parameters
; ***************************
; ***************************
; Logging configuration
; ***************************

; LogFile: file to use for logging. Can be ‘/dev/null’ or ‘none’
; or empty to turn off logging. The default is ./sc_serv.log
; on *nix systems or sc_serv_dir\sc_serv.log on win32.
; Note: on win32 systems if no path is specified the location is
; in the same dir as the executable, on *nix systems it is in the
; current directory.
LogFile=sc_serv.log

; RealTime displays a status line that is updated every second
; with the latest information on the current stream (*nix and win32
; console systems only)
RealTime=1

; ScreenLog controls whether logging is printed to the screen or not
; on *nix and win32 console systems. It is useful to disable this when
; running servers in background without their own terminals. Default is 1
ScreenLog=1

; ShowLastSongs specifies how many songs to list in the /played.html
; page. The default is 10. Acceptable entries are 1 to 20.
ShowLastSongs=10

; TchLog decides whether or not the DNAS logfile should track yp
; directory touches. Adds and removes still appear regardless of
; this setting.
; Default is yes
; TchLog=yes
; WebLog decides whether or not hits to http:// on this DNAS will
; be logged. Most people leave this off because the DSP plug-in
; uses http:// calls to update titles and get the listener count,
; which takes up a lot of log space eventually. If you want to
; see people making hits on your admin.cgi or index pages, turn
; this back on. Note that this setting does NOT affect XML stats
; counters for hits to http:// pages.
; Default is no.
; WebLog=no
; W3CEnable turns on W3C Logging. W3C logs contain httpd-like accounts
; of every track played for every listener, including byte counts those listeners
; took. This data can be parsed with tools like Analog and WebTrends, or given
; to third parties like Arbitron and Measurecast for their reporting systems.
; Default is Yes (enabled).
W3CEnable=Yes

; W3CLog describes the name of the logfile for W3C logging. Default logfile is
; sc_w3c.log, in the same directory wherever the DNAS gets started from.
W3CLog=sc_w3c.log

; ***************************
; Network configuration
; ***************************
; SrcIP, the interface to listen for source connections on (or to make relay
; connections on if relaying). Can and usually will be ANY or 127.0.0.1
; (Making it 127.0.0.1 will keep other machines from being able to
; broadcast using your shoutcast server )
SrcIP=ANY

; DestIP, IP to listen for clients on (and to contact yp.shoutcast.com)
; can and usually will be be ANY. If your machine has multiple IP addresses,
; set this to the one you want it to be accessed by.
DestIP=ANY

; Yport, port to connect to yp.shoutcast.com on. For people behind caching
; webproxies, change this to the alternate port (666 is what it might be,
; check http://www.shoutcast.com if you have problems). Otherwise, leave this at 80.
; We’re actively working on re-opening port 666, but as of release the only
; working port is port 80.
Yport=80

; NameLookups. Specify 1 to perform reverse DNS on connections.
; This option may increase the time it takes to connect to your
; server if your DNS server is slow. Default is 0 (off).
NameLookups=0

; RelayPort and RelayServer specify that you want to be a relay server.
; Relay servers act as clients to another server, and rebroadcast.
; Set RelayPort to 0, RelayServer to empty, or just leave these commented
; out to disable relay mode.
; RelayPort=8000
; RelayServer=192.168.1.58

; ***************************
; Server configuration

; ***************************

; AdminPassword. This password (if specified) changes the

; behavior of Password to be a broadcast-only password, and
; limits HTTP administration tasks to the password specified
; here. The broadcaster, with the password above, can still
; log in and view connected users, but only the AdminPassword
; will grant the right to kick, ban, and specify reserve hosts.
; The default is undefined (Password allows control for both
; source and admin)
AdminPassword=default ß ini diubah sesuai admin

; AutoDumpUsers controls whether listeners are disconnected if the source
; stream disconnects. The default is 0.
AutoDumpUsers=0

; AutoDumpSourceTime specifies how long, in seconds, the source stream is
; allowed to be idle before the server disconnects it. 0 will let the source
; stream idle indefinately before disconnecting. The default is 30.
AutoDumpSourceTime=30

; ContentDir specifies the directory location on disk of where to stream
; on-demand content from. Subdirectories are supported as of DNAS 1.8.2.
; Default is ./content, meaning a directory named content in the same directory
; as where sc_serv was invoked from.
; ContentDir=./content
; IntroFile can specify a mp3 file that will be streamed to listeners right
; when they connect before they hear the live stream.
; Note that the intro file MUST be the same samplerate/channels as the
; live stream in order for this to work properly. Although bitrate CAN
; vary, you can use ‘%d’ to specify the bitrate in the filename
; (i.e. C:\intro%d.mp3 would be C:\intro64.mp3 if you are casting at 64kbps).
; The default is no IntroFile
; IntroFile=c:\intro%d.mp3
; BackupFile can specify a mp3 file that will be streamed to listeners over
; and over again when the source stream disconnects. AutoDumpUsers must be
; 0 to use this feature. When the source stream reconnects, the listeners
; are rejoined into the live broadcast.
; Note that the backup file MUST be the same samplerate/channels as the
; live stream in order for this to work properly. Although bitrate CAN
; vary, you can use ‘%d’ to specify the bitrate in the filename
; (i.e. C:\backup%d.mp3 would be C:\backup32.mp3 if you are casting at 32kbps).
; The default is no BackupFile
; BackupFile=C:\intro%d.mp3

; TitleFormat specifies a format string for what title is sent to the listener.
; For example, a string of ‘Justin Radio’ forces the title ‘Justin Radio’ even
; when the source changes the title. You can use up to one ‘%s’ in the string
; which lets you contain the title from the source. For example, if your
; TitleFormat is ‘Justin Radio: %s’, and the source plug-in’s title is
; ‘Billy plays the blues’, then the net title is
; ‘Justin Radio: Billy plays the blues’. Note: only works on non-relay servers.
; The default is no format string.
TitleFormat=Radionya anak BSC:%s

; URLFormat specifies a format string for what url is sent to the listener.
; Behaves like TitleFormat (see above).
; The default is no format string.
; URLFormat=http://www.server.com/redirect.cgi?url=%s

; PublicServer can be always, never, or default (the default, heh)
; Any setting other than default will override the public status
; of the source plug-in or of a SHOUTcast server that is being relayed.
PublicServer=default

; AllowRelay determines whether or not other SHOUTcast servers will be
; permitted to relay this server. The default is Yes.
AllowRelay=Yes

; AllowPublicRelay, when set to No, will tell any relaying servers not
; to list the server in the SHOUTcast directory (non-public), provided
; the relaying server’s Public flag is set to default. The default is
; Yes.
AllowPublicRelay=Yes

; MetaInterval specifies how often, in bytes, metadata sent.
; You should really leave this at the default of 8192, but the option is
; provided anyway.
MetaInterval=8192

itu aja, yang lain gak usah diedit.. sekarang setelah selesai dengan shoucastnya kita beralih ke samboadcaster nya.. yang perlu diingat untuk menginstall sam broadcaster adalah kita harus mempunyai mysql sebagai database.. so yang belum punya my sql harap install dulu yak !!

setelah install sambroadcaster jangan lupa cracknya di copy ke folder tempat penginstalan sambroadcaster tadi (default c:/program files/spacial audio/SAM BC/ )

oke deh.. sekarang tinggal cara menjalankannya aja :

1. jalankan dulu shoutcast nya (klik start > all programs > shoutcast > shoutcast DNS (GUI)
ntar di layer monitor bakal muncul server monitor, jangan di close yak !!
2. kemudian sama seperti diatas, tapi untuk sam broadcaster (klik start > all programs > sam broadcaster > sambroadcaster
trus ntar bakal keluar tampilan seperti dibawah ini :

Di desktop B, itu yang pertama harus kita setting dulu, sebelum kita harus menyetel lagu dan cuap2x 😛
Pertama pada encoders :
Klik tanda tambah, trus pilih accplus v 2, trus ntar isi sample bitratenya terserah ada.. formatnya ikuti sample..
Kemudian pada tab server detail,klik yang shoutcast, masukkan nama station nya.. paswordnya jangan lupa..Kemudian klik ok. Setelah itu klik kanan configurasi yang baru kita buat tadi, trus klik start.

Kedua pada statistic relay :
Sama seperti diatas, klik tanda tambah, pilih shoutcast dan isikan password. Setelah itu ok.
Kemudian klik kanan konfigurasi yang kita buat tadi dan force update J

Daaaaaann.. server is UP now!!

Sekarang yang perlu kita atur adalah lagu dan caranya cuap2x :
Sekarang kita pergi ke desktop A, disitu tempat kita play lagu, dan nyetel mic…….

BSC radio is on air now…bersama saya dj_kuman